Ready to build your own power box? It has never been easier with this kit that comes with a predrilled box!
If ordered without the glow cup, no glow cup hole or glow cup switch hole will be cut out of the box.
This box will not fit the Amped Outdoors 60ah battery for trolling motors.
This kit includes all the components you need to build yourself the IHP Deluxe Power box! Pre drilled holes in this box will take the guess work out of your build. Just install the components and wire it up! Please read the description and watch this video prior to ordering. https://www.youtube.com/watch?v=bX3HpFpCcj0
- Predrilled box
- 3 hole panel with BLUE voltmeter
- USB and cig port
- SAE Port
- SAE Pigtail w/ Fuse Holder and 2 each 3Amp & 5Amp Fuses
- SAE Pigtail w/o Fuse Holder
- 4 BLUE switches (plus 1 free spare)
- 2 binding post/banana posts
- 2 round LED lights
- Single inline fuse holder and 10 amp fuses
- Ice Hole Power sticker
- Jig Charging Cup (We will drill the holes)
- Wire and terminal kit
Outside Dimensions: 13.5" (L) x 7.4" (W) x 8.5" (H); Inside Dimensions: 11" (L) x 5.8" (W) x 7.2" (H)
Need batteries for your box? These are the batteries that we recommend!
This box can accommodate:
Up to Four 7-9 ah SLA or AGM batteries
Up to Four 15ah Amped Lithium batteries
Up to four 10ah Dakota Lithium batteries
Up to Two 12ah SLA or AGM batteries
Up to Two Amped 20ah batteries
Up to Two Dakota Lithium 18ah batteries
Up to Two Amped 30ah WIDE batteries
One Dakota Lithium 23Ah (Under the Handle)
UP to Two Amped NMC series batteries. 19Ah-48Ah
*NMC Battery voltage is too high for shack lights. If planning use power box for shack lights, go with the LiFeP04 battery option.
This kit only includes the basic electronic components for a power box and does not include a wiring schematics. Please watch our DIY video!